Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
2
1. Random orbit with forced rotation mode
lock button
3. Pad
Makita offers an extensive range of optional super soft,
soft and hard pads.
To change the pad, perform as follows:
1.
Use the change knob and change the mode into
random orbit with forced rotation mode.
2.
Press and hold the shaft lock button, and remove
the pad by turning the pad counterclockwise.
3.
Keep holding the shaft lock button, and install a
new pad by turning the pad clockwise firmly.
Dust nozzle
CAUTION:
Make sure the bolt is securely
tightened after installing the dust nozzle.
Otherwise the dust nozzle may fall and cause per-
sonal injury.
NOTICE:
Do not carry the tool by the dust noz-
zle. Otherwise the tool may be damaged.
You can remove the dust nozzle in accordance with the
operation.
To remove the dust nozzle, loosen the bolt, slightly open
the holder part, and remove the dust nozzle.
To install the dust nozzle, insert the mouth of the dust
nozzle into the dust outlet of the housing, align the
tongue of the holder part with the groove of the housing,
and tighten the bolt.
2
3
1
1. Dust nozzle
2. Dust outlet
1
3
2. Shaft
3. Mouth
1. Holder part
2. Bolt
Dust collection (optional accessory)
3
1. Front cuffs 24
2. Hose
If a Makita hose is used, you can connect the front cuffs
24 to the dust outlet directly.
OPERATION
CAUTION:
Only use Makita genuine abrasive
discs and pads for sander (optional accessories).
CAUTION:
Never switch on the tool when it
is in contact with the workpiece, it may cause an
injury to operator.
CAUTION:
Make sure the work material is
secured and not unstable. Falling object may
cause personal injury.
CAUTION:
Hold the tool firmly with one hand
on the switch handle and the other hand on the
front grip (or side handle) when performing the
tool.
NOTICE:
Be careful not to press down the shaft
lock button. It may shorten tool life.
NOTICE:
Never force the tool. Excessive pressure
may decrease the sanding / polishing efficiency, dam-
age the abrasive disc / pad or shorten tool life.
2
1
1
2
3. Dust outlet
ENGLISH
7
Publicité
Table des Matières
