Facom V.DGP150F Notice Originale page 8

PLACING THE MACHINE IN SERVICE
LUBRIFICATION
Always use of an air line lubricator with these machine. We recommended the
following Filter-Lubricator-Regulator Unit: FACOM N.580.
Every eight hours' operation, if a lubricator is not used on the compressed air
network, inject 1/2 to 1cm through the machine's inlet connection.
3
1 collet holder
2 collet nut
3 collet
D (diameter of mounted point) ØD : 17mm
Ds (diameter of shank) ØDs : 3mm
Lg (gripping length) & Lo (overhang) : 32 mm
T length of mounted point : 16 mm
Model Motor power
rating
HP
V.DGP150F 0,12
Model Rated speed
rpm
V.DGP150F 70 000
* k = measurement uncertainty in dB
WE, FACOM S.A.S., 6/8 RUE GUSTAVE EIFFEL - 91 420 MORANGIS - FRANCE, DECLARE UNDER OUR OWN RESPONSIBILITY THAT THE PRODUCT
V.DGP150F – FACOM STRAIGHT HEAD PENCIL DIE GRINDER
- IS IN CONFORMITY WITH THE «MACHINERY» DIRECTIVE 2006/42/CE
- AND IS IN CONFORMITY WITH THE PROVISIONS OF THE HARMONISED EUROPEAN STANDARD EN ISO 11148-9:2011
The undersigned is responsible for compilation of the technical fi le and makes this declaration on behalf of Facom.
NU-V.DGP150F_0716.indd 8
Noise level
Pressure dB(A) Power dB(A)
k* k*
79,1 3 90,1 3
Air Working
consumption pressure
l/min bar
28,3 6,2
** k = measurement uncertainty in m/s²
CE DECLARATION OF CONFORMITY
EMERGENCY
GATE VALVE
Vibrations
level
m/s
Pressure dB(C)
k*
91,2 3 2,37
Weight Length
kg mm
0,9 150
2
k**
0,7
Markus Rompel
20.03.2016
Director Engineering
29/07/2016 11:10:38