Specifications - Sharp MD-MT877H Mode D'emploi

Specifications

As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes
for product improvement without prior notice.
The performance specification figures indicated are nominal values of production units. There may be some deviations
from these values in individual units.
Power source DC 1.2V: Rechargeable Nickel-Metal Hydride battery (AD-N55BT) x 1
DC 5V:
DC 1.5V: Commercially available, "AA" size (LR6), alkaline battery x 1
DC 1.5V: Separately available car adaptor, AD-CA55X (for cars with a 12-24V DC negative
Power consumption 7 W (AC adaptor)
Output power RMS; 10 mW (5 mW + 5 mW) (0.2% T.H.D.)
Charging time Approx. 3.5 hours
Input sensitivity MIC H: reference input level
MIC L: reference input level
LINE:
Output level Earphones: maximum output level
LINE:
Dimensions Width: 71.9 mm (2-27/32")
Weight 131 g (0.29 lbs.) with rechargeable battery
Input socket Line/optical digital, microphone (powered by the main unit)
Output socket Earphones (impedance: 32 ohms)/remote control unit
Type Portable MiniDisc recorder
Signal readout Non-contact, 3-beam semi-conductor laser pick-up
Audio channels Stereo 2 channels/monaural (long-play mode) 1 channel
Frequency response 20 – 20,000 Hz (± 3 dB)
Rotation speed Approx. 400 – 1,350 rpm
E-51
AC adaptor (AC 220 - 230V, 50/60 Hz)
earth electrical system) (Used with separately available plug adaptor (AD-M66PA))
0.25 mV input impedance
2.5 mV input impedance
reference input level 100 mV input impedance
5 mW + 5 mW
specified output 250 mV (-12 dB)
Height: 16.8 mm (11/16")
10 k ohms
10 k ohms
20 k ohms
load impedance 32 ohms
load impedance 10 k ohms
Depth: 78.7 mm (3-1/8")