Advanced Recording - Sharp MD-MT877H Mode D'emploi

Advanced Recording

Playback sound-actuated recording
(Synchronised recording)
Recording automatically starts or pauses by detect-
ing sound from the stereo system (Synchronised re-
cording).
1
Press the REC button.
2
Begin playback on the stereo system con-
nected to this portable MD.
3
5 5 or 4 5 4 4 4 button to adjust the re-
Press the 5 5 4
cording level.
4
Press the PAUSE button on the stereo sys-
tem to enter the playback pause mode.
Select the starting point for your recording and press
the PAUSE button.
5
Press the MODE button repeatedly to select
recording mode (page 23).
6
Press the ENTER button (Synchro Button).
" " will be displayed.
To cancel the operation, press the • ■ / :OFF button.
7
Begin playback on the stereo system.
Recording will begin automatically.
To interrupt recording:
When the stereo system is stopped, the unit will enter the
synchro recording pause mode. When playback is re-
sumed, the recording will be resumed.
If a silence lasts for 3 seconds or more, the recording will
be paused (Pause function does not work for
approximately 10 seconds after a recording starts).
When the unit receives sound again, recording automati-
cally starts.
A new track number is created when the recording resumes.
E-22