Volume Control; Bass Control - Sharp MD-MT877H Mode D'emploi

Playback : continued
1
Insert the earphones plug firmly into the
earphones socket on the remote control
unit.
2
Plug the remote control into the
on the unit.
3
Insert a MiniDisc (page 12).
4
Press the 06 06 06 06 button.
06
Playback starts automatically with a playback only
MiniDisc or a MiniDisc which is protected against ac-
cidental erasure (Auto-play function).
To interrupt playback
Press the 06 button.
To resume playback, press the 06 button again.
To stop playback
Press the • /:OFF button.
If the unit is not operated for at least 2 minutes whilst in
the stop mode, the power will shut off automatically.
To turn off the power
Press the • /:OFF button whilst in the stop mode.

Volume control

Press the VOL+ button to increase the volume and
the VOL– button to decrease the volume.
socket
Volume (0 - 30)

Bass control

Each time the BASS button is pressed (Remote con-
trol: the SOUND button is pressed), the tone will be
switched as follows.
BASS 1 Emphasised slightly
BASS 2 Emphasised more
BASS 3 Emphasised fully
BASS OFF Cancelled
Notes:
If power failure occurs whilst playing a disc using the AC
adaptor, disconnect it from the wall socket. Otherwise, play-
back may start automatically when electricity resumes.
If you connect the AC adaptor without installing the re-
chargeable battery, playback may start automatically. Be
sure to turn off the power.
Reduce the volume before starting to play. MiniDiscs, com-
pared to ordinary cassette tapes, have very little noise. If
the volume is adjusted according to your usual expecta-
tions of noise, high volume may damage your hearing.
The sound escaping from your earphones may annoy
people around you.
In particularly crowded places (such as on trains or buses),
reduce the volume.
E-18