Sharp MD-MT877H Mode D'emploi page 146

Changing Default Settings (continued)
Beep sound
You can eliminate the confirmation sound that beeps
when you press a button.
Auto play
You can make the unit not play automatically when
you insert a playback-only MiniDisc or an accidental
erasure protected MiniDisc.
Auto power save
When the unit is used in a place exposed to much vibra-
tion, sound skipping can be decreased by cancelling the
auto power save function. (Battery will drain faster.)
Digital recording level
"D.L MODE 1"
The digital recording level you set will be kept even
after canceling recording.
"D.L MODE 2"
Every time you cancel recording, the level will re-
turn to [ D.L 0dB ].
What is auto power save function?
During playback, maximum 40 seconds (in stereo) of mu-
sical information is stored. Auto power save function auto-
matically adjusts the storage time between 5 and 40 sec-
onds to reduce the power consumption. If this function is
cancelled, the storage time cannot be adjusted. (It cannot
be adjusted even if it is operated on the battery charger.)
The storage time varies depending on the playback mode.
E-35
Operation indicator, backlight on the remote
control and display on the remote control
The illuminating pattern of the 3-colour LED and the
remote control can be changed.
LIGHT NORM:
• 3-colour LED Indication lamp is flashing.
• Backlight on the Lit for approx. 10 seconds when operated.
remote control
• Display on the Indicated.
remote control
LIGHT ALL:
• 3-colour LED Indication lamp is lit.
• Backlight on the Lit for approx. 10 seconds when operated.
remote control (Lit when operated on the battery charger.)
• Display on the Indicated.
remote control
LIGHT OPER:
• 3-colour LED Lit for approx. 10 seconds when operated
during playback or recording.
• Backlight on the Lit for approx. 10 seconds when operated.
remote control
• Display on the Indicated for approx. 10 seconds when
remote control operated.
LIGHT OFF:
• 3-colour LED The light is not turned on.
• Backlight on the The light is not turned on.
remote control
• Display on the Indicated for approx. 10 seconds when
remote control operated.