Sharp MD-MT877H Mode D'emploi page 138

Advanced Recording (continued)
About track numbers
1. Track numbers are created automatically during record-
ing via the analogue connection when a silence of 1
second or more is detected (Auto marker function). A
series of tracks can be recorded as one by disabling
the auto marker function see page 26.
About 1
second
Silence
First
track
2. When recording from a CD or a MiniDisc using the
digital connection, track numbers will be created at
the same points as on the CD or MiniDisc (Synchro
marker function).
First track Second track Third track
Playback
Track A Track B
side
First track Second track Third track
Recording
Track A Track B
side
Track numbers may not be created in proper places, de-
pending on the source to be recorded from, such as sig-
nals with noise.
The track numbers on the playback side may not match
the track numbers recorded on the MiniDisc.
E-27
When recording, if a programmed playback is performed
by the source or playback is performed by selecting tracks
manually, the MiniDisc track numbers may not be the same
as on the source.
Track numbers may not be created properly, depending
on the connected stereo system.
About sampling rate converter
Second
track
This portable MD incorporates a sampling rate converter
meaning it can record from digital radios or DAT tape record-
ers.
Note for digital recording
You can not copy a MiniDisc that you recorded from digital
inputs to another MiniDisc or DAT. It is prevented by the SCMS
Track C
(Serial Copy Management System). Recording from analogue
inputs is not affected.
Digital signals Digitally recorded
Track C
MiniDisc
CD player,
MiniDisc
player,
etc.
Digital
connection
Cannot record
Digital
connection