Important - Hitachi WH 14DMR Mode D'emploi

Masquer les pouces Voir aussi pour WH 14DMR:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 21
This Parts List will be helpful if presented with the
tool to the Hitachi Authorized Service Center when
requesting repair or other maintenance.
In the operation and maintenance of power tools, the
safety regulations and standards prescribed in each
country must be observed.
MODIFICATION:
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts may be changed without
prior notice.
GUARANTEE
We guarantee Hitachi Power Tools in accordance with
statutory/country specific regulation. This guarantee does
not cover defects or damage due to misuse, abuse, or
normal wear and tear. In case of complaint, please send
the Power Tool, undismantled, with the GUARANTEE
CERTIFICATE found at the end of this Handling instruction,
to a Hitachi Authorized Service Center.
NOTE
Due to HITACHI's continuing program of research and
development, the specifications herein are subject to
change without prior notice.

IMPORTANT

Correct connection of the plug
The wires of the mains lead are coloured in accordance
with the following code:
Blue:
–Neutral
Brown: –Live
As the colours of the wires in the mains lead of this tool
may not correspond with the coloured markings
identifying the terminals in your plug proceed as follows:
The wire coloured blue must be connected to the terminal
marked with the letter N or coloured black.
The wire coloured brown must be connected to the
terminal marked with the letter L or coloured red.
Neither core must be connected to the earth terminal.
NOTE
This requirement is provided according to BRITISH
STANDARD 2769: 1984.
Therefore, the letter code and colour code may not be
applicable to other markets except United Kingdom.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
Measured A-weighted sound pressure level:
Uncertainty KpA:3dB(A)
Wear ear protection.
The typical weighted root mean square acceleration
value:
9.1 m/s
7.4 m/s
9.2 m/s
6.3 m/s
English
100dB (WH14DMR, WH14DL)
101dB (WR14DMR, WR14DL,
WH18DMR, WH18DL)
103dB (WR18DMR, WR18DL)
89dB (WH14DMR, WH14DL)
90dB (WR14DMR, WR14DL,
WH18DMR, WH18DL)
92dB (WR18DMR, WR18DL)
2
(WH14DMR, WH14DL)
2
(WR14DMR, WR14DL)
2
(WH18DMR, WH18DL)
2
(WR18DMR, WR18DL)
10

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Wh 14dlWh 18dmrWh 18dlWr 14dmrWr 14dlWr 18dmr ... Afficher tout

Table des Matières