Style Telephone Art. 2610 - Comelit COLOR DIVA MT KIT 11 Manuel Technique

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Style telephone Art. 2610

8
2
1
3
3
4
6
6
5
8
7
7
9
Elegance telephone with additional functions and
pushbuttons and intercom service.
By means of special setting, Art. 2610 can manage intercom calls
and other additional functions (see summary table on page 36).
The telephone must always be mounted using Art. 1214/2C as
shown in the KD/DC connection diagram on page 80.
1. 3-position ringtone/Privacy service selector:
High position: Max. ringtone volume.
Middle position: Medium ringtone volume.
Low position: Privacy function activation
(Privacy service means exclusion of the call ringtone from
the external unit and switchboard; activation of the Privacy
function is signalled by a red indicator appearing at the top
right).
2. Privacy function indicator.
3. Signalling LED (available standard).
4. Door lock release pushbutton
5. Pushbutton 1 available as standard (programmable with
various functions, see table on page 39. Factory-set for
generic Actuator function).
6. Pushbutton 2 available standard (freeable, or programmable
with various functions, see table on page 39).
Switchboard call.
7. Optional pushbuttons C. NO. or LEDs (MAX 3) for
additional functions. (A)
8. Replaceable cover Fig. 7 page 28.
9. Pushbutton memo label for indicating the telephone
pushbutton functions (to be applied under the
interchangeable cover) Fig. 7 page 28.
10. Telephone handset (lift the handset to start communication).
(A) Pushbutton available with optional card Art. 1626.
Display LED available with optional card Art. 1627.
1
2
4
5
7
10
9
.
11. System connection terminals:
L L bus line connection.
CFP CFP floor door call input.
P2 C2 pushbutton P2 C terminals. NO. 24V 100mA dedicated
to various services (remove CV2 and CV3).
S+ S- Terminals for call repetition device.
12. JP1 Jumper for selection of Simplebus 1 and Simplebus 2
mode.
13. CV3 CV2 Jumper to be removed in order to have pushbutton
P2 C. NO.
14. Dip switch U2 for setting user code (see table on page 35).
15. Dip switch U4 for programming pushbuttons P1 and P2 (see
table on page 39).
16. Microphone volume control trimmer.
Clean using a cloth moistened with water. Do not use alcohol
and other aggressive products.
MT KIT
16
14
15
13
11
12
31
MT KIT

Publicité

Chapitres

Table des Matières
loading

Table des Matières