For Your Safety; Standard Equipment; Assembly And Disassembly; Installing The Mulch Insert - Stihl AMK 097 S Manuel D'utilisation

AMK 097 S, AMK 112 S
With a mulching kit, the ride-on mower can
be converted into a mulching mower.
For this purpose, the discharge opening of
the mowing deck is closed using a mulch
insert. The mowing blades installed as
standard remain on the machine.
0.1 General
This instruction manual constitutes
original manufacturer's instructions in
the sense of EC Directive 2006/42/EC.
STIHL is continually striving to further
develop its range of products; we therefore
reserve the right to make alterations to the
form, technical specifications and
equipment level of our standard
equipment.
For this reason, the information and
illustrations in this manual are subject to
alterations.
This instruction manual may describe
models that are not available in all
countries.
This instruction manual is protected by
copyright. All rights reserved, especially
the right of reproduction, translation and
processing using electronic systems.

1. For your safety

Observe the instruction manual
of the ride-on mower,
particularly the "For your safety"
and "Maintenance" sections.
Remove the ignition key before
performing any work on the
ride-on mower.
0478 907 9924 A - EN
Always wear thick gloves when
performing assembly and
maintenance work.
Before each use, perform a
visual check to ensure that the mulch
insert, mowing blade and blade fastening
are in good condition. - Never remove the
discharge flap for mulching.
Only work with an undamaged and
properly installed mulch insert.

2. Standard equipment

Item Designation
A Mulch insert
B Retaining pin (pre-installed
in mulch insert)
– Instruction manual
3. Assembly and
disassembly

3.1 Installing the mulch insert

Preparing the ride-on mower for
mulching:
● Open the discharge flap (1) and hold it
open.
● Fit mulch insert (A) onto the discharge
opening and guide onto pin (2). The
tabs (3) on the front of the mulch insert
must be positioned as shown.
● Fix the mulch insert using retaining
pin (B) on pin (2).
Printed on chlorine-free bleached paper. Paper is recyclable. Cover is halogen free.
● Check for secure seating of the mulch
insert and close the discharge flap.
The ride-on mower is ready for
mulching.

3.2 Removing the mulch insert

Using the ride-on mower as a side
discharge mower:
● Open the discharge flap (1) and hold it
open.
● Pull retaining pin (B) out of pin (2); it
remains on the mulch insert. Remove
mulch insert (A).
● Close the discharge flap.
1
The ride-on mower can again be used
Qty.
as a side discharge mower.
1
1
4. Mulching instructions
1

4.1 General information

During mulching, the cut grass is chopped
up several times through a special air flow
guidance system in the mower blade area
and then blown back into the turf. The
finely shredded clippings remain on the
2
lawn.
The decomposing clippings return organic
nutrients to the soil, serving as a natural
fertiliser. Weed growth is slowed down and
significant amounts of fertilizer are saved.
The use of a mulching kit also prevents
blockages at the discharge opening as,
during mulching, the grass is no longer
ejected at the side of the mowing deck.
3
5