Kombisystem; Guide To Using This Manual; Safety Precautions And Working Techniques - Stihl HT-KM Notice D'emploi

English

KombiSystem

In the STIHL KombiSystem a number of
different KombiEngines and KombiTools
can be combined to produce a power
tool. In this instruction manual the
functional unit formed by the
KombiEngine and KombiTool is referred
to as the power tool.
Therefore, the separate instruction
manuals for the KombiEngine and
KombiTool should be used together for
the power tool.
Always read and and make sure you
understand both instruction manuals
before using your power tool for the first
time and keep them in a safe place for
future reference.
2

Guide to Using this Manual

Pictograms
All the pictograms attached to the
machine are shown and explained in this
manual.
Symbols in text
WARNING
Warning where there is a risk of an
accident or personal injury or serious
damage to property.
NOTICE
Caution where there is a risk of
damaging the machine or its individual
components.
Engineering improvements
STIHL's philosophy is to continually
improve all of its products. For this
reason we may modify the design,
engineering and appearance of our
products periodically.
Therefore, some changes, modifications
and improvements may not be covered
in this manual.
Safety Precautions and
Working Techniques
Special safety precau-
tions must be observed
when working with the
pole pruner because it
operates at a very high
chain speed, has very
sharp cutters and a long
reach.
Both user manuals (Kom-
biEngine and KombiTool)
must be read through
attentively before using
the unit for the first time
and kept in a safe place
for future reference. Non-
compliance with the user
manuals may cause seri-
ous or even fatal injury.
The machine should only be provided or
loaned to people familiar with this model
and its operation. The KombiEngine and
KombiTool user manuals should always
be handed over with the machine.
Use your pole pruner for limbing only
(removing or pruning branches). Saw
wood and wooden objects only.
The machine must not be used for any
other purposes – risk of accidents!
Only use guide bars, saw chains, chain
sprockets and accessories that are
explicitly approved for this power tool
model by STIHL or are technically
identical. If you have any questions in
this respect, consult your dealer.
Use only high quality parts and
accessories. in order to avoid the risk of
accidents and damage to the machine.
HT-KM