Hooking Up The Audio Components - Sony MDS-JE530 Mode D'emploi

Hooking Up the Audio Components

Amplifier,
etc.
Digital equipment with a DIGITAL OUT connector only
*
Digital equipment with both DIGITAL IN and OUT connectors
**
Requir e d cor d s
Audio connecting cords (2) (supplied)
When connecting an audio connecting cord, be sure to match the
colour-coded pins to the appropriate jacks: white (left) to white
and red (right) to red.
White (L)
Red (R)
Optical cables (2) (only one supplied)
• When connecting an optical cable, take the caps off the
connectors and insert the cable plugs straight in until they click
into place.
• Do not bend or tie the optical cables.
Coaxial digital connecting cable (1) (not supplied)
CONTROL A1
CD player, DBS CD player, DBS tuner
tuner amplifier, DAT deck, MD deck,
**
etc.
White (L)
Red (R)
VOLTAGE
SELECTOR
*
, Digital
Things you should keep in mind while
hooking up the system
• Turn off the power to all components before making
any connections.
• Do not connect any mains lead until all the connections
are completed.
• Be sure the connections are firm to prevent hum and
noise.
Jacks (connectors) for connecting audio
c o m p o n e n t s
Connect To the
Amplifiers LINE (ANALOG) IN/OUT jacks
CD players or DBS tuners DIGITAL COAXIAL IN jack or
DIGITAL OPTICAL IN connector
Digital amplifiers, DAT decks, DIGITAL OPTICAL IN/OUT
or another MD deck connectors
Mains lead
5
GB