Undoing The Last Edit - Sony MDS-JE530 Mode D'emploi

Undoing the Last Edit

You can undo the last edit operation and restore the
contents of the MD to the condition that existed before the
operation. Note, however, that you can't undo an edit
operation if you perform any of the following operations
after the edit:
• Press REC z on the deck.
• Press z or MUSIC SYNC on the remote.
• Turn off the deck or eject the MD.
• Disconnect the mains lead.
MENU/NO
1
While the deck is stopped and no track number
appears in the display, press MENU/NO.
"Edit Menu" appears in the display.
2
Turn AMS (or press ./> repeatedly) until
"Undo ?" appears.
"Undo ?" doesn't appear if no editing has been done.
3
Press AMS or YES.
One of the following messages appears depending on
the last edit operation.
Last edit operation
Erasing a track
Erasing all the tracks on an MD
Erasing a portion of a track
Dividing a track
Combining tracks
Moving a track
Naming a track or MD
Copying a track or disc name
Renaming a track or MD
Erasing a track or disc name
Erasing all the names on the MD
4
To cancel the operation
Press MENU/NO or x.
AMS YES
Message
Erase Undo?
Divide Undo?
CombineUndo?
Move Undo?
Name Undo?
Press AMS or YES.
"Complete!!" appears for a few seconds and the MD is
restored to the condition that existed before the edit
operation.
39
GB