Playing Tracks Repeatedly - Sony MDS-JE530 Mode D'emploi

Playing Tracks Repeatedly

You can play an entire MD repeatedly. This function can
be used with Shuffle Play to repeat all the tracks in
random order (page 27), or with Programme Play to
repeat all the tracks in the programme (page 27). You can
also repeat a specific track or portion within a track.
REPEAT
REPEAT
Note
If you turn off the deck or disconnect the mains lead, the deck
will store the last setting of the repeat play ("Repeat All" or
"Repeat 1") and recall it the next time you turn on the deck.
Repeating all the tracks on the MD
(Repeat All Play)
Press REPEAT repeatedly until "Repeat All" appears in
the display.
When you play an MD, the deck repeats the tracks as
follows:
When the play mode is The deck repeats
Normal play (page 23) All the tracks in sequence
Shuffle Play (page 27) All the tracks in random order
Programme Play (page 27) All the tracks in the programme in
sequence
To stop Repeat All Play
Press x.
To resume normal play
Press REPEAT repeatedly until "Repeat Off" appears in
the display.
26
GB
Repeating the current track
(Repeat 1 Play)
While the track you want to repeat is being played,
press REPEAT repeatedly until "Repeat 1" appears in
the display.
Repeat 1 Play starts.
` / 1
A
To stop Repeat 1 Play
Press x.
To resume normal play
Press REPEAT repeatedly until "Repeat Off" appears in
the display.
Repeating a specific portion within a
X . >
track (Repeat A-B Play) Z
H X
z x
You can specify one portion within a track to be played
. >
M
m M
repeatedly. Note that the portion that you specify must be
AyB
within the boundaries of a single track.
1
2
To stop Repeat A-B Play and resume normal play
Press REPEAT or CLEAR.
z
Repeat A-B Play
You can change the current ending point to a new starting point,
then specify a new ending point to repeat a portion right after the
current portion.
1 During Repeat A-B Play, press AyB.
2 Locate the new ending point (point B) and press AyB.
While the deck is playing, press AyB at the
starting point (point A) of the portion to be played
repeatedly.
"REPEAT A-" lights up and "B" flashes in the display.
Continue playing the track or press M to locate
the ending point (point B), then press AyB.
"REPEAT A-B" lights up and Repeat A-B Play starts.
You can set a new starting point and ending point during
The current ending point changes to the new starting point
(point A).
"REPEAT A-" lights up and "B" flashes in the display.
"REPEAT A-B" lights up and the deck starts to repeat the
newly specified portion.