Energy Saving Tips - Dometic SC Série Notice D'utilisation

SC26, SCT26, SC30, SC30B, SC38
6.1

Energy saving tips

• Choose a well ventilated location which is protected from direct sunlight.
• If you want to set an increased energy efficiency and a limited cooling capacity for
the cooler device, use the device's ECO mode.
• Allow warm food to cool down first before placing it in the cooling device to
keep cool.
• Do not open the cooling device more often than necessary.
• Do not leave the cooling device open for longer than necessary.
6.2 Mounting the wheels (only SC38)
➤ Mount the wheels as shown to the cooling device (fig. 3, page 4).
6.3 Using the cooler in DC mode
I
NOTE
If you connect the cooler to the cigarette lighter of your vehicle,
remember that the ignition must be turned on to supply it with power.
➤ Place the device on a firm base.
➤ Connect the DC connection cable to the cigarette lighter or the DC socket in the
vehicle.
✓ The device starts cooling/heating the interior.
➤ To switch off the cooling device, disconnect the DC connection cable.
EN
Operation
13