Publicité
Les langues disponibles
Les langues disponibles
User instructions
The welding mask is delivered ready for
use. You just have to adjust the comfor-
table head band for the right fit. The
shade cartridge automatically darkens
with arc ignition.
Prior to welding
• Check whether the front cover lens
and the front lens frame are inserted
and fixed in place.
• Adjust the head band so that the
mask sits as far down on the head as
possible and is close to the face.
Adjust mask angle when the
mask is in the lowered position by
turning the eccentric knob.
• Use the switch to select the correct
level of protection for your welding
process
Special features
• The eyes are always protected
against UV and IR rays regardless of
the shade setting.
• To protect the eyes against the resi-
dual light from afterglowing materials,
the switching time from dark to light is
set at 0.2 seconds
• The mask is solarcell operated which
means that a battery change is not
required
Important notes
• The mask and cartridge must never
be placed on hot surfaces.
• Never open or damage the shade car-
tridge.
• Always use only original ESAB
parts.
• Only use at temperatures between
- 10°C and + 70°C / 14°F and 158°F
• Protect the cartridge from liquids and
dirt.
• Regularly clean the surfaces of the
cartridge; do not use any strong sol-
vents.
• Always keep the sensors and solar-
cells clean; to clean use a cloth dam-
pened in methylated sprit.
• Regularly replace the front cover len-
ses with new, original ESAB
front cover lenses.
Possible faults and their correc-
tions
Irregular darkening
• Head band unevenly set on both sides
(different distance between eyes and
the shade cartridge).
• Reduce the distance to the shade car-
tridge
Shade cartridge does not darken or
flickers
• Sensors are dirty or covered up.
• Front cover lens is dirty or damaged.
• Welding current is too low.
Slow switching times
• Operating temperature is too low (do
not use below - 10°C / 14°F).
Poor vision
• Front cover lens and/or shade cartrid-
ge are dirty.
• Insufficient ambient light.
• Protection level incorrectly set.
Publicité
