Balluff BMD 1L K Série Notice D'utilisation page 163

Menu - Setup
Menu
Setup
Setup
Setup
Setup
The following tables show the default values of the instrument. De-
pending on the instrument version or application, all menu items may
The menu items in bold are safety-relevant in terms of the functional
Menu item
Lock adjustment
Measurement loop name
Units
Probe length
Type of medium
Application
Medium, dielectric constant
Superimposed gas phase
Dielectric constant, upper medium (TS)
Tube inner diameter
Max. adjustment - Level
Max. adjustment - Level
Min. adjustment - Level
Min. adjustment - Level
Accept adjustment of the level measure-
ment?
Max. adjustment - Interface
Max. adjustment - Interface
Min. adjustment - Interface
Min. adjustment - Interface
Integration time - Level
Integration time - Interface
Linearization type
Linearization - Socket correction
Linearization - Vessel height
7 Set up with the display and adjustment module
Default value
Locked
Sensor
Länge der Messsonde factory set-
ting
Liquid
Level, vessel
Water-based, > 10
Yes
1.5
200 mm
Distance: 0.000 m(d) - note block-
ing distances
Distance: Probe length - take dead
band into account
No
Distance: 0.000 m(d) - note block-
ing distances
Distance: Probe length - take dead
band into account
0.0 s
0.0 s
Linear
0 mm
Probe length
49