Dhollandia DH-LSP.05 Instructions De Montage page 51

EN
S
•
During the weight test, check (and adjust if required) the
hydraulic pressure to suit the nominal lift capacity of the
HTL. [See Fig. 9.11] Seal the pressure relief valve after
that.
S M
•
After satisfactory completion of the put-into-service test
and the practical weight tests, double-check and revise
the settings of the end stops on both lift arms, and of the
vertical stow position of the platform behind the rear
doors.
DHOLLANDIA
9.11
51
!
!