Preparing For Vacation; Preparing To Move; Light Bulb Replacement - GE TCX22 Série Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Care and cleaning of the refrigerator.
1/4" Hex Head Screws
Back of Freezer
Front of Freezer
Freezer Light
1/4" Hex Head Screws
Fresh Food Light
10

Preparing for Vacation

For long vacations or absences, remove
food and unplug the refrigerator. Move the
freezer control to the OFF position, and
clean the interior with a baking soda
solution of one tablespoon (15 ml) of
baking soda to one quart (1 l) of water.
Leave the doors open.

Preparing to Move

Secure all loose items such as grille, shelves
and drawers by taping them securely
in place to prevent damage.

Light Bulb Replacement

Light bulbs are located at the top of the
fresh food and freezer compartments.
To replace a light bulb, unplug the
refrigerator's power cord plug from the wall
outlet.
Freezer Light
To remove light cover, remove the 1/4" hex
head screws at the back of the cover. Slide
the cover back and remove. After replacing
with the same size bulb, reinstall the light
cover and plug in the refrigerator.
Move the icemaker feeler arm (for
icemaker equipped models) to the STOP
(up) position and shut off the water supply
to the refrigerator.
If the temperature can drop below freezing,
have a qualified servicer drain the water
supply system (for icemaker equipped
models) to prevent serious property
damage due to flooding.
Be sure the refrigerator stays in an upright
position during moving.
Fresh Food Light
To remove the light cover, remove the
1/4" hex head screws at the back of the
cover. Slide the cover back and remove.
After replacing with same size bulb, reinstall
light cover and plug in the refrigerator.

Publicité

Table des Matières
loading

Table des Matières