Upholstery Nozzle - Miele Complete C3 Mode D'emploi

Using the accessories sup‐
plied (dia. 15)
 Crevice nozzle
For cleaning in folds, crevices or
corners.
 Dusting brush with natural bris‐
tles (only available in selected
countries)
For cleaning skirting boards, or‐
nate and carved objects.
The head can be swivelled to ad‐
just the angle.

 Upholstery nozzle

For cleaning upholstery, mattress‐
es, cushions, curtains, covers etc.
Certain models are supplied as stand‐
ard with the following accessories
which are not illustrated.
– Turbobrush
– Classic Allergotec floorhead
These are supplied with their own oper‐
ating instructions.
To open the accessories compart‐
ment (dia. 16)
 Press the release button on the ac‐
cessories compartment lid.
The accessories compartment will then
open.
 Take out the accessory you require.
 Press down firmly on the lid to close
it.
AllTeQ / EcoTeQ floorhead (dia. 17)
For general use and also for vacuuming
the stairs.

For safety reasons when vac‐
uuming stairs it is best to start at the
bottom of the stairs and move up‐
wards.
Use
Unwind the mains cable (dia. 18)
 Pull the mains cable out to the re‐
quired length (max. cable length ap‐
prox. 7.5 m).
 Insert the plug into the socket cor‐
rectly and switch on.

If vacuuming for longer than 30
minutes, the mains cable must be
pulled out to its fullest extent. Other‐
wise there is a danger of overheating
and damage.
To rewind the cable (dia. 19)
 Switch off at the wall socket and re‐
move the plug.
 Press the rewind foot switch briefly.
The cable will rewind automatically.
To switch on and off (dia. 20)
 Press the On/Off foot control .
To regulate the suction power
The suction power can be regulated to
suit the type of flooring being cleaned.
Reducing the suction power reduces
the amount of effort required to ma‐
noeuvre the floorhead.
The vacuum cleaner has symbols on
the controls which indicate the type of
use the settings are suitable for.
The setting selected will light up yellow.
en
41