Maintaining And Cleaning S4 - Dometic S4 Instructions De Montage

Maintaining and cleaning S4

7.3 Opening and closing roller blinds
A
NOTICE! Risk of damage due to a build-up of heat between
the roller blind and the window.
In strong sunlight, only close the blackout roller blind two thirds of
the way.
➤ Hold the blackout roller blind at the grip and pull it to the flyscreen
(fig. b).
➤ Click the blackout roller blind onto the flyscreen.
➤ Select the required position by moving the two latched-roller blinds at the
same time and allow to latch into place (fig. c).
Opening the roller blind
➤ Move the roller blind so that the blackout roller blind is closed.
➤ Separate the roller blinds by pressing the pivot on the flyscreen.
➤ Guide the flyscreen back.
Do not let the roller blind spring back.
➤ Open the blackout roller blind by pressing together the two sliders at the
side on the grip. (fig. d)
8 Maintaining and cleaning S4
A
NOTICE!
Do not use any sharp or hard objects for cleaning since they may
damage the acrylic glass.
Only use cleaning agents that are approved by the manufacturer.
Acrylic glass polish (item no. 9103501188), special polishing cloth
(item no. 9103501190) and acrylic glass cleaning agent (item
no. 9103501189) or the cleaning set (item no. 9103501201).
➤ Clean the roller blind with mild soap and water.
➤ Put talcum powder on the rubber seal.
10
S4
EN