Miele Complete C3 ACAA Boost Mode D'emploi page 41

After that the vacuum cleaner will
switch on at the setting which was used
previously.
 Press the + foot control to select a
higher setting.
 Press the - foot control to select a
lower setting.
Footswitch with Boost function
(dia. 21 + 22)
Some models also feature a Boost
power function. This function uses in-
creased power for a short period for va-
cuuming both fine and coarse stubborn
soiling.
 Press the + footswitch until the max-
imum power level has been reached.
 Then press the + footswitch again.
This activates the Boost function for 20
seconds. The Boost indicator will light
up yellow.
You now have the following options:
 Press the - footswitch before the 20
seconds have elapsed.
This switches the Boost function off
and activates maximum power.
 Press the + footswitch again once the
20 seconds have elapsed.
This activates the Boost function for an-
other 20 seconds. It can be activated
three times in a row. After that a pause
of one minute is required before reactiv-
ating it.
Using the Boost power setting
changes the actual power consump-
tion (see "Notes on Delegated Regu-
lation (EU) No. 665/2013 and
666/2013").
To open the air inlet valve (dia. 23)
(not on models with the Eco Comfort
handle)
It is easy to reduce the suction power
for a short time, e.g. to prevent rugs or
other objects being sucked into the va-
cuum cleaner.
 Open the air inlet valve on the handle
far enough to reduce the suction
power.
The floorhead will be easier to man-
oeuvre.
During vacuuming
 When vacuuming, pull the cleaner be-
hind you on its wheels. You can stand
it upright for vacuuming stairs and
curtains etc.
en
41