Vermeiren Albatros II Mode D'emploi page 19

3.2.2 Assembly
L
WARNING: Risk of clamping - Take care that no body parts and wires get trapped,
crushed or cut during assembly.
1. Remove the safety spindle (locking pin) from the
bottom end of the pole by gently pressing the button
at the head of the spindle. The safety spindle can
now be removed easily.
2. Undo the transport lock (wing screw) gently and the
pole can now be raised.
klick
L
WARNING: Risk of injury - Make sure that
3.
the safety spindle is correctly inserted.
Fix the pole in place by pushing the safety spindle at
the end of the pole in with the pushbutton depressed
until its other end clearly protrudes. Release the
pushbutton on the safety spindle and check that it
cannot be pulled out.
Page 17
2.a
The standing
safety (traction
clicks audibly into place
once the pole is put in its
final position.
Albatros II
2012-09
position
screw)