Tool Specifications; For Your Safety; Machine Elements; Intended Use - Bosch GBM 13 HRE Instructions D'emploi

EURO • Printed in USA • BA 2 610 907 617 • GBM 13 HRE • GB • OSW 04/01
2 610 907 617.book Seite 1 Montag, 7. Mai 2001 12:53 12

Tool Specifications

Drill
Part number
Rated power
Output power
No-load speed
Rated speed
Torque
Drill chuck clamping range 1/2" (13 mm)
Drill dia. steel
Drill dia. wood
Weight approx.
Safety class

Machine Elements

1 Ring gear drill chuck
2 Auxiliary handle
3 Lock-on button
4 On/Off switch
5 Rotational direction switch
6 Drill chuck key
7 Screwdriver attachment (bit)*
8 Bit holder*
9 Locking screw
10 Allen key*
*Optional accessories
*Not all of the accessories illustrated or described are
included as standard delivery.

Intended Use

The machine is intended drilling in wood,
metal, ceramic and plastic. Machines with
electronic control and right/left rotation are
also suitable for screwing and thread cutting.
10 • 2 610 907 617 • TMS • 27.04.01
GBM 13 HRE
0 601 049 6..
550 W
285 W
0 – 550 rpm
0 – 380 rpm
60 Nm
1/2" (13 mm)
1 1/2" (40 mm)
2.1 kg
/ II
Connect machines that are used in the open
via a residual current device (RCD) with an
actuating current of 30 mA maximum. Use
only extension cables that are approved for
outdoor use.
Insert the mains plug only when the ma-
chine is switched off.
Always direct the cable to the rear away
from the machine.
When drilling use the auxiliary handle 2.
Hold tools by insulated gripping sur-
faces when performing an operation
where the cutting tool may contact hid-
den wiring or its own cord.
Contact with a "live" wire will make exposed
metal parts of the tool "live" and shock the
operator.
If the drilling tool jams it will cause the tool
to jolt. If this occurs switch the tool off imme-
diately.
When working with the machine, always
hold it firmly with both hands and provide for
a secure stance.
Be careful when screwing in long screws;
danger of sliding off.
English - 1

For Your Safety

Working safely with this ma-
chine is possible only when
the operating and safety infor-
mation are read completely
and the instructions
tained therein are strictly fol-
lowed. In addition, the general
safety instructions in the en-
closed booklet must be fol-
lowed. Before using for the
first time, ask for a practical
demonstration.
If the mains cable is damaged or
cut through while working, do not
touch the cable but immediately
pull the mains plug. Never use
the machine with a damaged ca-
ble.
For long hair, wear hair protec-
tion. Work only with closely fitting
clothes.
Wear ear protection.
Wear safety goggles.
con-