Appendix B - Emc Information - GENDEX GXS-700 Manuel D'utilisateur

Appendix
B
The GXS-700 sensor is, like any electronic medical device, subject to electromagnetic
interactions with other electronic devices. The information in this chapter addresses this issue.
The EMC information in this chapter is provided for the medical system established by
connecting the GXS-700 sensor to a computer. This computer must be compliant with
IEC 60950-1 (if located outside the patient environment) or IEC 60601-1 (if located inside the
patient environment). Please consult the documentation of the computer for complete
EMC information.
Important:
Portable/mobile radio frequency communications equipment can affect the
function of the GXS-700 sensor as well as any other electronic medical
equipment.
GXS-700 is a USB compliant device and shall be used with USB compliant cables suitable for
high speed/USB 2.0 cables. Such cables are either marked "USB 2.0" or "USB Hi-Speed."
USB certified hubs can be used to extend the distance to the USB host/computer. The length
of the cable connection to the hub or between hubs shall not exceed 5 m.
CAUTION
Using non-USB compliant cables or hubs, or exceeding the maximum count
of USB hub devices for extending the distance, can degrade the immunity
of the GXS-700 sensor to electromagnetic fields or increase the emission of
electromagnetic fields from the sensor.
032-0279-EN Rev 1
EMC Information
B-1