Maintenance; Image Quality Assurance - GENDEX GXS-700 Manuel D'utilisateur

Gendex GXS-700 TM
The holders should be sterilized in an autoclave. If the infection control guidelines for your
country permit, the holders can be disinfected using the cleaning agents below, following the
manufacturer's instructions:

Maintenance

GXS-700 does not require any special maintenance other than regular cleaning and
disinfection.
Clean the monitor screen, mouse and keyboard frequently.
Set monitor brightness and contrast properly. Be sure to use a video mode recommended for
use with GXS-700.

Image Quality Assurance

Image quality of the GXS-700 sensor depends on several factors:
•
the quality of the X-ray source (kV, focal spot size, distance)
•
the alignment of the X-ray source to the anatomic region
•
the applied X-ray dose / exposure time
•
the settings of the computer monitor
It is recommended that you establish a procedure for periodic review of the image quality. If
image quality is not satisfactory, or degrading, please check the contributing system parts as
outlined below:
6-6
®
•
CaviCide (Manufactured by Metrex)
•
CIDEX OPA (Ortho-Phthalaldehyd, Distributed in the US by
Advanced Sterilization Products)
•
Asepticare (Manufactured by Ecolab)
•
FD322 (Manufactured by Dürr Dental)
•
Isopropyl Alcohol
032-0279-EN Rev 1