Get Started; First Start-Up; Welcome - Nokia E Série Mode D'emploi

Get started

After you have set up your device, switch it on and start to
explore what is new in Eseries.

First start-up

1. Press and hold the power key until you feel
the device vibrate.
2. If prompted, enter the PIN code or lock code,
and select OK.
3. When prompted, enter the country in which
you are located and the current date and
time. To find your country, enter the first
letters of the country name. It is important
to select the correct country, because
scheduled calendar entries may change if
you change the country later and the new
country is located on a different time zone.
4. The Welcome application opens. Select from the various
options, or select Exit
To configure the various settings in your device, use the
wizards available on the home screen and the Settings wizard
application. When you switch the device on, it may recognise
20
to close the application.
the SIM card provider and configure some settings
automatically. You can also contact your service provider for
the correct settings.
You can switch the device on without inserting a SIM card.
The device starts up in the offline mode, and you cannot use
the network-dependent phone functions.
To switch the device off, press and hold the power key.

Welcome

When you switch on your device for the first time, the
Welcome application opens. Select from the following:
Tutorial provides information about your device and
•
shows you how to use it.
Switch enables you to transfer content, such as contacts
•
and calendar entries, from a compatible Nokia device.
"Transfer content between devices", p. 23.
Settings wizard helps you configure various settings.
•
"Settings wizard", p. 21.
Operator contains a link to your operator's home portal.
•
© 2008 Nokia. All rights reserved.
See
See