Security And Data Management; Lock The Device; Memory Card Security - Nokia E Série Mode D'emploi

Security and data management

Manage the data and software on your device, and take care
of the security of the device and its contents.
Important: Your device can only support one antivirus
application. Having more than one application with antivirus
functionality could affect performance and operation or
cause the device to stop functioning.

Lock the device

Important: If the device has been locked, enter the lock
code to activate the phone function. When the device is
locked, calls may be possible to the official emergency
number. Making an emergency call in the offline profile or
when the device is locked requires that the device recognise
the number to be an official emergency number. It is
advisable to change the profile or unlock the device by
entering the lock code before you make the emergency call.
To prevent access to the contents of your device, lock the
device when in home screen. Press the power key, select
phone, and enter your lock code. The default lock code is
© 2008 Nokia. All rights reserved.
12345. To unlock, press the left selection key, enter your lock
code, and press the scroll key.
To change the lock code, select
General Security
>
Enter the old code and then the new code twice. The new
code can be 4-255 characters long. Both alphabets and digits
can be used, and both uppercase and lowercase alphabets
are possible.
You can also lock the device remotely by sending a text
message to the device. To enable remote locking and to
define the text for the message, select
Settings General
>
Allow remote lock
and confirm the message. The message must be at least 5
characters long.

Memory card security

Select Menu
>
You can protect a memory card with a password to prevent
Lock
unauthorised access. To set a password, select
Set password. The password can be up to 8 characters long
Menu Tools
>
Phone and SIM card
>
Menu
Security Phone and SIM card
> >
> Yes. Enter the remote lock message
Tools > Memory.
Settings
> >
Lock code.
>
Tools
> >
>
Options
>
111