Free Memory; Memory Card; Microsdhc; Use A Memory Card - Nokia E Série Mode D'emploi

Free memory

To see how much memory is currently in use, how much free
memory remains, and how much memory is consumed by
each data type, select Menu
details Phone memory
>
Tip: To ensure that you have adequate memory,
transfer data regularly to a memory card or computer,
or use File manager to delete files you no longer need.
After you install applications to a compatible memory card,
installation files (.sis, .sisx) remain in the device memory. The
files may use large amounts of memory and prevent you from
storing other files. To maintain sufficient memory, use Nokia
PC Suite to back up installation files to a compatible PC, then
use the file manager to remove the installation files from the
device memory. If the .sis file is a message attachment, delete
the message from the Messaging inbox.

Memory card

Select Menu Tools > Memory.
>
If you cannot use a memory card in your device, you may have
the wrong type of memory card, the card may not be
formatted for your device, or the card has a corrupted file
system. Your Nokia device supports the FAT16 and FAT32 file
system for memory cards.
© 2008 Nokia. All rights reserved.
Options Memory
> >
or Memory card.

MicroSDHC

This device uses microSD and microSDHC memory
cards.
To ensure interoperability, use only compatible
memory cards with this device. Check the
compatibility of a memory card with its manufacturer
or provider. Other memory cards than microSD and
microSDHC cards are not compatible with this device. Using
an incompatible memory card may damage the memory card
as well as the device, and data stored on the incompatible
card may be corrupted.

Use a memory card

To format a memory card for your device, select
Format memory card. When a memory card is formatted,
all data on the card is lost permanently. Consult your retailer
to find out if you must format the memory card before you
can use it.
To change the name of the memory card, select
Memory card name.
You can protect a memory card with a password to prevent
unauthorised access. To set a password, select
Set password. The password can be up to eight characters
long and is case-sensitive. The password is stored in your
device. You do not need to enter it again while you use the
memory card in the same device. If you use the memory card
in another device, you are asked for the password. Not all
memory cards support password protection.
Get started
Options
>
Options
>
Options
>
27