1. General Information
1.1. Declaration of Conformity
EC Declaration of Conformity
in its entirety, according to EC Directive on Machinery 2006/42/EC, Annex II A)
The manufacturer,
Xylem Service Austria GmbH
Ernst Vogel-Strasse 2
2000 Stockerau
Austria
of the pump unit hereby declares:
12M K7
15M K8
that the above mentioned pump unit complies with all regulations of these guidelines in their
current version:
EC-Directive 2006/42/EC "Machinery"
The aforementioned technical documentation get submitted upon request to the competent
authority in electronic form on data storage medium.
Responsible for compiling the technical documentation:
Dipl. Ing. Gerhard Fasching
Dept. Research & Development
Xylem Service Austria GmbH
Ernst Vogel-Strasse 2
2000 Stockerau
Austria
A change to an aggregate which was not approved by us invalidates this declaration. This also
applies in the case that the aggregate is installed in equipment that does not have the
declaration of conformity in accordance with the Directive on Machinery, 2006/42/EC.
Stockerau, 03.10.2016
(valid only for Xylem Service Austria GmbH aggregate supplied
Translation of the Original Operation Manual
........................................................................................................................
Dipl.Ing. Gerhard Fasching
Manager Research & Development
3