General Power Tool Safety Warnings - Makita DTS131 Manuel D'instructions

ENGLISH
(Original instructions)
1 Red indicator
2 Button
3 Battery cartridge
4 Indicator lamps
5 Check button
6 Switch trigger
7 Lamp
8 Reversing switch lever
9 Changed in four steps
SPECIFICATIONS
Capacities
No load speed
Impacts per minute
Rated voltage
Overall length
Battery cartridge
• Due to our continuing program of research and
development, the specifications herein are subject to
change without notice.
• Specifications and battery cartridge may differ from
country to country.
• Weight, with battery cartridge, according to EPTA-
Procedure 01/2003
Intended use
The tool is intended for screw driving in wood, metal and
plastic.

General Power Tool Safety Warnings

WARNING Read all safety warnings and all
instructions. Failure to follow the warnings and
instructions may result in electric shock, fire and/or
serious injury.
Save all warnings and instructions for future
reference.
Explanation of general view
10 Hard
11 Medium
12 Soft
13 T mode
14 Battery capacity
15 Bit
16 Sleeve
17 Bit-piece
18 Groove
Model
Machine screw
Standard bolt
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Impact mode (Hard)
Impact mode (Medium)
Impact mode (Soft)
T mode
Net weight
DTS131
4 mm – 8 mm
5 mm – 8 mm
0 – 3,000 min
0 – 2,000 min
0 – 1,200 min
0 – 1,200 min
0 – 2,500 min
0 – 2,200 min
0 – 1,400 min
0 – 1,400 min
D.C. 14.4 V
136 mm
BL1415/
BL1415N
1.2 kg
CORDLESS IMPACT DRIVER SAFETY
WARNINGS
1. Hold power tool by insulated gripping surfaces,
when performing an operation where the
fastener may contact hidden wiring. Fasteners
contacting a "live" wire may make exposed metal
ENE033-1
parts of the power tool "live" and could give the
operator an electric shock.
2. Always be sure you have a firm footing.
Be sure no one is below when using the tool in
GEA010-1
high locations.
3. Hold the tool firmly.
4. Wear ear protectors.
5. Do not
immediately after operation. They may be
extremely hot and could burn your skin.
6. Keep hands away from rotating parts.
SAVE THESE INSTRUCTIONS.
19 Hook
20 Screw
21 Vent
22 Standard bolt
23 Fastening torque
24 Fastening time (S)
25 Proper fastening torque
26 High tensile bolt
DTS141
4 mm – 8 mm
5 mm – 8 mm
–1
0 – 3,200 min
–1
0 – 2,000 min
–1
0 – 1,200 min
–1
0 – 1,200 min
–1
0 – 2,700 min
–1
0 – 2,200 min
–1
0 – 1,400 min
–1
0 – 1,400 min
D.C. 18 V
136 mm
BL1815/
BL1430/
BL1815N/
BL1440/
BL1820/
BL1450
BL1820B
1.4 kg 1.2 kg
touch the bit or
–1
–1
–1
–1
–1
–1
–1
–1
BL1830/
BL1840/
BL1840B/
BL1850/
BL1850B
1.5 kg
GEB054-3
the workpiece
5