Bluetooth Mode - Hama DR1500BT Mode D'emploi

6.5 Manual FM station search
• Press JOG MODE/SELECT.
• Turn VOLUME/SELECT to tune to a specific frequency as
soon as the display shows <Tuning>.
6.6 Mono/stereo mode
While a station is playing, press SCROLL/OK ► II in order
switch between Auto and Mono.
Note
• This device has a default setting of Auto mode, and
so automatically switches between stereo and mono
depending on the signal strength received.
• However, reception situations may occur where
the reception quality or clarity can be improved if
automatic tuning using the above specified method is
manually overridden.
6.7 Saving and accessing presets
Both DAB and FM mode can each save up to 10 stations as
‚Presets'. In this way you can quickly access your preferred
stations.
• Tune the radio to the station that you want to save as a
preset.
• Press and hold MEMORY until Save to P is shown on
the display and the number belonging to this empty
preset is displayed. (F8)
• If you wish to use the offered empty preset to save the
tuned station, go directly to the next step. If not, turn
SCROLL/OK ► II in order to choose another preset
number.
• Confirm your choice with SCROLL/OK ► II, this saves the
tuned station as this preset. As confirmation the display
shows the message ‚Preset # saved' (F9).
6
• To access a preset press MEMORY and use SCROLL/
OK ► II to choose the desired preset number. The station
saved here previously will play automatically if you do not
use the controls for a few seconds.

6.8 Bluetooth mode

You have the option to connect your digital devices
wirelessly to the radio via Bluetooth.
Two different Bluetooth profiles are supported:
• Advanced Audio Distribution Profile (A2DP)
- High-quality audio transmission
- Streaming of audio data from a PC, mobile phone, etc.
• Audio Video Remote Control Profile (AVRCP)
- Use of connected device as remote control for radio.
Note – Bluetooth
• Only one device (PC, Notebook, mobile phone, etc.)
can connect to the radio for each profile mentioned
above.
• Note that the quality of the Bluetooth connection can
vary according to the model of the device and the age
of its integrated Bluetooth driver.
• If possible, use devices with Bluetooth 2.1 and take
care that the most up-to-date firmware from your
device manufacturer has been installed.
• It is not possible to guarantee compatibility with all
devices and media types on the market.
• Take care that no other Bluetooth devices and
connections within a radius of approx 10m are active.
• Take care that there are no walls, bookcases, groups
of people or similar between the radio and your
Bluetooth device. The range and transmission quality
can be sharply reduced due to such obstacles.