Troubleshooting - Dometic MaCave S17G Notice D'utilisation

MaCave
9

Troubleshooting

If you are unable to solve a problem yourself, get in touch with customer
services (see address list overleaf)
Problem
Appliance does not work
Appliance is not cold
enough
Appliance switches itself
on and off
EN
Possible cause
Appliance is not connected to a
power supply
Appliance is switched off
Circuit breaker or fuse has blown Switch on circuit breaker or
Temperature is not set properly
The ambient temperature could
require a higher temperature set-
ting
Door was opened frequently
Door was not closed properly
Door is not hermetically-sealed
Room temperature is higher than
average.
The cabinet was recently replen-
ished with new bottles
Door was opened frequently
Door was not closed properly
Door is not hermetically-sealed
Troubleshooting
Remedy
Connect the appliance
Switch on the appliance
replace fuse
Check the set temperature
Set a higher temperature
Do not open the door more
often than necessary
Close door properly
Check the door seal and
clean or replace
Put the appliance in a cooler
place
Leave the appliance to work
for a while until the set tem-
perature has been reached.
Do not open the door more
often than necessary
Close door properly
Check the door seal and
clean or replace
53