DeWalt DW744 Mode D'emploi page 18

E N G L I S H
JOBSITE TABLE SAW DW744
Congratulations!
You have chosen a D WALT Power Tool. Years of experience, thorough
E
product development and innovation make D
reliable partners for professional Power Tool users.
Table of contents
Technical data
EC-Declaration of conformity
Safety instructions
Package contents
Description
Electrical safety
Mains plug replacement (U.K. & Ireland only)
Using an extension cable
Assembly and adjustment
Instructions for use
Maintenance
Guarantee
Technical data
Blade diameter
Blade bore
Motor power (input)
Motor power (output)
Voltage
(U.K. & Ireland only)
No load speed
Depth of cut at 90°
Depth of cut at 45°
Ripping capacity
Overall dimensions
Weight
Standard equipment:
TCT series 40 blade, guard, rip fence, mitre fence, blade spanner, wrench
Fuses:
Europe
U.K. & Ireland
The following symbols are used throughout this manual:
Denotes risk of personal injury, loss of life or damage to the
tool in case of non-observance of the instructions in this
manual.
Denotes risk of electric shock.
Sharp edges.
en - 1
WALT one of the most
E
DW744
mm 250
mm 30
W 1,600
W 850
V 230
V 230/115
-1
min 3,650
mm 76
mm 56
mm 610
mm 570 x 700 x 410
kg 29
230 V tools 10 Amperes, mains
230 V tools 13 Amperes, in plugs
EC-Declaration of conformity
DW744
D WALT declares that these Power Tools have been designed in
E
compliance with: 89/392/EEC, 89/336/EEC, 73/23/EEC, EN 60204,
EN 55104 / EN 55014-2, EN 55014, EN 61000-3-2 & EN 60555-3.
en - 1
en - 1
For more information, please contact D
en - 2
en - 3 refer to the back of the manual.
en - 3
Level of sound pressure according to 86/188/EEC & 89/392/EEC,
en - 3
measured according to DIN 45635:
en - 3
en - 3
en - 3
L (sound pressure)
en - 5
pA
L (acoustic power)
en - 6
WA
en - 6 * at the operator's ear
Take appropriate measures for the protection of hearing if the
sound pressure of 85 dB(A) is exceeded.
TÜV Rheinland
Sicherheit und Umweltschutz GmbH
Am Grauen Stein
D-51105 Köln
Germany
Director Engineering and Product Development
Horst Großmann
D WALT, Richard-Klinger-Straße 40,
E
D-65510, Idstein, Germany
WALT at the address below or
E
DW744
dB(A)* 91
dB(A) 104
Cert. No.
BM 981036601
13