Troubleshooting - Electrolux GT200 Notice D'utilisation

7. Rotate the drain plug 180 degrees to
let the drain water flow into the tray.

10. TROUBLESHOOTING

WARNING!
Refer to Safety chapters.
10.1 What to do if...
There are sounds which may occur during the operation of the appliance
(e.g. bubbling, whirring, cracking or clicking), which are normal.
Problem
The appliance does not op‐
erate.
8. Clean the interior and dry it
thoroughly.
9. Switch on the appliance.
10. Set the temperature to MAX setting
and close the lid. Wait two or three
hours before you reload previously
removed food into the appliance.
11. Set the temperature to the desired
setting.
Possible cause
The appliance is switched
off.
The mains plug is not con‐
nected to the mains socket
correctly.
Make sure the water does
not spill out of the tray.
Solution
Switch on the appliance.
Check if the appliance is
plugged correctly.
ENGLISH 71