Technical Data; Installation Instructions; Installation; Fitting The Appliance - AEG FAVORIT 45260 Notice D'utilisation

40

Technical data

Dry water drop signs on
glasses and dishes
Technical data
Dimensions
Electrical connection - Voltage
- Overall power - Fuse
Water supply pressure
Capacity

Installation instructions

Installation

WARNING!
Make sure that mains plug is disconnected from the mains socket during installation.

Fitting the appliance

Obey the instructions in the enclosed template to:
• Build-in the appliance.
• Install the furniture panel.
• Connect to the water supply and drain.
Remove all packaging before you move the dishwasher into position.
Put the appliance adjacent to a water tap and a drain.
When you put the appliance in place, make sure that the water hoses are not kinked or
squashed.
Install the appliance on a shelf in a furniture of the kitchen.
Make sure that:
• The furniture is correctly attached to the wall.
• The shelf for the dishwasher is correctly attached in the furniture.
• The front edge of the shelf is level with the sides of the furniture.
• The dishwasher is level on the shelf to operate correctly.

Adjusting the level of the appliance

Make sure that the appliance is level to close and seal the door correctly. If the level of the
appliance is correct, the door does not catch on the sides of the cabinet. If the door does
not close correctly, loosen or tighten the adjustable feet until the appliance is level.
The cleaning results are not satisfactory
• Increase rinse aid dosage.
• The detergent can be the cause.
Width
Height
Depth
Information on the electrical connection is given on the rating
plate on the inner edge of the dishwasher door.
Minimum
Maximum
54,5 cm
44,7 cm
49,4cm
0,8 bar (0,08 MPa)
10 bar (1,0 MPa)
6 place settings