Télécharger Imprimer la page

Akai Professional MPK Road 88 Guide D'utilisation page 5

Masquer les pouces Voir aussi pour MPK Road 88:

Publicité

Les langues disponibles
  • FR

Les langues disponibles

8.
Setup B/Edit: Press this button to activate the controller's performance parameters. Press and
hold this button, along with keys on the keyboard to edit these parameters: MIDI channel 1-16
(A0-B2), pitch wheel on/off (A#0), mod wheel on/off (C#1), pedal 1-3 on/off (D#1-G#1), MIDI
port on/off (A#1), USB port (C#2).
Note: If the Setup button is held along with the other Setup button, both Setup buttons will
function simultaneously.
9.
Preset Up: Press this button to cycle up through the presets.
10. Preset Down: Press this button to cycle down through the presets.
Rear Panel
1 2
1.
1/4" (6.35 mm) TRS Main Audio Outputs: Connect these audio outputs to your mixer or
power speakers.
2.
1/4" (6.35 mm) Aux Audio Outputs: Connect these outputs to external devices such as an
effects processor or a recorder.
3.
1/4" (6.35 mm) TRS Expression Inputs: Connect expression pedals here for adding
expressive changes during performances.
4.
1/4" (6.35 mm) TRS Sustain Input: This socket accepts a momentary-contact foot pedal (sold
separately). When pressed, this pedal will sustain the sound you are playing without having to
keep your fingers pressed down on the keys.
5.
MIDI In: Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI Out of an
external sound module or to the MIDI Out of a synthesizer.
6.
MIDI Out: Use a five-pin MIDI cable (sold separately) to connect this jack to the MIDI In of an
external sound module or to the MIDI In of a synthesizer.
7.
USB Port: Use the included USB cable to connect the keyboard to a computer to trigger a
software synth or MIDI sequencer.
8.
Power Switch: Use this switch to power the unit on or off.
9.
Power Input: If you do not wish to power the unit through the USB connection and are using
the MIDI connector to trigger an external sound module, connect a 6V DC, 1A, center-positive
power adapter here (sold separately).
Front Panel (not shown)
1.
1/4" (6.35 mm) TRS Headphone Output: This audio output duplicates the audio signal from
the rear panel Outs 1/2.
3 4
5
6
8
7
9
5

Publicité

loading