Accessories; Troubleshooting - RIDGID R138HPF Manuel D'utilisation

ACCESSORIES

To order parts and maintenance kits, call 1-866-539-1710.
Driver Maintenance Kit .....................................................................................................................................079077073701
Overhaul Kit ......................................................................................................................................................079077073702
WARNING:
Current attachments and accessories available for use with this tool are listed above. Do not use any attachments
or accessories not recommended by the manufacturer of this tool. The use of attachments or accessories not
recommended can result in serious personal injury.

TROUBLESHOOTING

PROBLEM
Air leak near the top of the tool
or in the trigger area
Air leak near the bottom
of the tool
Tool does nothing or
operates sluggishly
Tool jams frequently
This product has a 90-Day Satisfaction Guarantee Policy, as well as a
For Warranty and Policy details, please go to www.RIDGID.com
POSSIBLE CAUSE
Loose cap
Worn or damaged O-rings or seals
Loose screws
Worn or damaged O-rings or bumper
Inadequate air supply
Inadequate lubrication
Worn or damaged O-rings or bumper
Incorrect fasteners
Damaged fasteners
Loose magazine or nose bolts
Dirty magazine
Worn or damaged driver
Fasteners are not placed toward
the bottom of the magazine
Fasteners are inserted backward
NOTE: ILLUSTRATIONS START ON PAGE 13
AFTER FRENCH AND SPANISH LANGUAGE SECTIONS.
Three-year Limited Warranty.
or call (toll free) 1-866-539-1710.
11 – English
SOLUTION
Tighten cap
Install Overhaul Kit
Tighten screws
Install Overhaul Kit
Verify adequate air supply
Lubricate tool
Install Overhaul Kit
Verify that fasteners are the correct size
Replace fasteners
Tighten screws
Clean magazine
Install Driver Maintenance Kit
Install fastener tips at the bottom of the
magazine
Make sure the point of the fasteners and
directional arrow point down toward the
bottom of the magazine