Beta 564/3R Mode D'emploi page 9

TORQUE MULTIPLIERS with anti-wind up system
TORQUE REACTION
When the tool is in operation, the reaction foot rotates in the opposite direction to the output
square drive and must be allowed to rest squarely against a solid object or surface adjacent
to the bolt to be tightened (see Figure 2).
Torque
Reaction
Clockwise
Torque
Reaction
Clockwise
MAKE SURE THAT THE REACTION FOOT IS ONLY USED WITHIN SUCH LIMITS AS
SHOWN IN FIGURE 3.
For special applications or if extremely deep sockets are used, the standard arm can be ex-
tended, provided that such limits as shown in Figure 3 are kept to.
FAILURE TO KEEP TO SUCH LIMITS AS SHOWN IN FIGURE 3 MAY CAU-
SE EARLY WEAR OR DAMAGE TO THE OUTPUT DRIVE OF THE TORQUE
MULTIPLIER.
2
FIGURE
Torque
Reaction
Counterclockwise
Torque
Reaction
Counterclockwise
EN
9