Electrical Connection - Novy Salsa 6500 Mode D'emploi Et D'installation

Maintenance of the hood
Please allow the lights to cool down sufficiently before
cleaning the hood. Use a soft, wet cloth and a mild
detergent to clean the hood. Never use aggressive,
abrasive detergents or sponges. Bleach will damage
stainless steel. The stainless steel surfaces can be
treated with
Novy Inoxcleaner (906.060) after cleaning.

ELECTRICAL CONNECTION

The hood has a cable with earthed plug and must be
connected to an earthed wall socket.
Amperage and absorption are shown on the
specification label on the inside of the hood.
The plug must be easily accessible. Replacement of the
connection cable is to be done by a qualified installer.
4.4 Technical problem
In case of technical problems please contact Novy
Service Department:
For Belgium: Tel.: 056/36.51.02
For France: Tel.: 03.20.94.06.62
For Germany: Tel.: 0511.54.20.771
For all other countries: your local installor or Novy
Belgium: +32 (0)56/36.51.02
Please supply us with the model number of your hood.
The model number can be found on the engraved
plaque behind the filter.
You can make a note of the number here:
.......................................................................................
Electrical scheme: p. 14
Dimensions: p.15
Characteristics of the product on condition of changes
or printing errors, May 2018
EN 13