VESTEL VHI90AX Mode D'emploi page 45

3. Place the hanging board against the ceiling. Determine the position of the twelve
holes. WARNING! Make sure that the ceiling can bear at least 120kg and that the
thickness of the ceiling is at least 30mm.
4. Remove the hanging board. Drill the twelve holes with the 8mm drill.
5. Insert twelve wall plugs.
6. Attach the hanging board to the ceiling with twelve M6 x 40mm screws.
7. Do one of the following:
• If you use the cooker hood with the active carbon filter:
NOTICE! An active carbon filter is used to remove odours when the connection
of the cooker hood to an exhaust pipe is not possible. Carbon filters should not
be washed or cleaned. Replace the carbon filters every 3 to 6 months.
i. Press the filter lock and remove the mesh filters.
ii. Place the carbon filter. Lock the carbon filter by moving the handles.
70-80 cm
iii. Place the mesh filters.
45 | VESTEL VHI90AX
70-80 cm
Hanging board