Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
WIRING INSTRUCTIONS
RJ45 Ethernet Cable
The Ipercom system has been designed to work with the EIA/TIA 568B standard.
•
Plug the cable into one of the RJ45 connectors with the Urmet logo.
•
Insert the wire in its guide, according to the provided colour code (Standard T568B).
Black sheath
Grey sheath
•
Cut the cables so that they protrude from the guide by about 5 mm, insert the guide in its plug and crimp
with the specially provided tool.
Make sure that the grey sheath stays inside the plug.
This type of connection will NOT guarantee double insulation.
POWER SUPPLY
The 1717/32 or /34 IP video door phone can be supplied power in two different ways:
— POE
— 24 / 48 V
local power supply
When the power supply is used, POE is not available because the IP video door phone is powered only by
the local power supply. In this case, RJ45 can be connected to the NO POE port of the switch.
(#)
48 V
version differs from the previous 24 V
48V
product:
INSTALLATION
It is possible to fix the wall bracket by using a 503 box and the supplied screws, or a Ø 60 box with suitable
screws.
4
Wire
No.
1
White-Orange
2
Orange
1
3
White-Green
4
Blue
8
~ 5 mm
1
8
(#)
Box
503
Cable colour
Plug
1
8
version for the following label on the back of the
Wire
Cable colour
No.
5
White-Blue
6
Green
7
White-Brown
8
Brown
Box
Ø 60 mm / 2.36''
DS1717-053A
Publicité
Table des Matières
