Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
FUNCTIONAL
DESCRIPTION
CAUTION:
•
Always be sure to remove the fuel cell, the
battery cartridge and nails before adjusting or
checking function on the tool.
Installing or removing battery
cartridge
•
Always switch off the tool before insertion or
removal of the battery cartridge.
•
To remove the battery cartridge, withdraw it from
the tool while pressing the button on the side of
the cartridge as shown in the figure.
► 1. Button
•
To insert the battery cartridge, hold it so that the
battery cartridge front shape fits to that of the
battery installment opening and slip it into place.
Always insert it all the way until it locks in place
with a little click. If not, it may accidentally fall
out of the tool, causing injury to you or someone
around you.
•
Do not use force when inserting the battery car-
tridge. If the cartridge does not slide in easily, it is
not being inserted correctly.
Attaching the metering valve to the
fuel cell
► 1. Metering valve 2. Cap
Detach the cap (in case the metering valve is provided
with the cap).
Push in the front edge.
1
Push in the rear edge until it seats.
6 ENGLISH
Fuel cell
1
2
Publicité
Table des Matières
