Warranty & Maintenance - Babboe Carve-E Manuel D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

WARRANTY & MAINTENANCE
Warranty
To keep the warranty on your Babboe Carve-E cargo bike, it is important to get your bike serviced within the first
4-12 weeks or after 100 km of heavy use to check if the main components (including gears, spokes and brakes)
are all working effectively. This can be done at your local bike shop or Babboe dealer
Maintenance
Even though the electric Babboe Carve contains high-quality components, it is very important to keep it well
maintained. Lubricate moving parts on a regular basis and ensure that the cables remain flexible, for example,
during cold spells of frost. At the back of this manual is a maintenance overview. Keep the receipts for the
warranty for the maintenance and inspection.
Maintenance of the wooden cargo box
The box is resistant to the Dutch climate. However, we still recommend that you always use a rain cover, rain tent
or cargo bike cover. This will protect the box against the various weather conditions. It will also, for example,
protect the cargo bike against damage from children climbing in and out of the box. Damage to the paint makes
the wood more vulnerable to moisture. If damage occurs, treat it with a clear coating of varnish suitable for
outdoor use. This will prevent moisture from penetrating into the wood.
Cleaning
To make your Babboe cargo bike look new again, you can clean it by firstly brushing it with a soft brush to remove
the dirt and then washing it with warm water. Regular cleaning of the Babboe cargo bike promotes longevity.
Beware of excessive use of water around the electronics and battery. Make sure the area between the sensor
plate in the sensor (by the bottom bracket) is not dirty. When cleaning the cargo bike it is advisable to remove the
battery. Never use a high-pressure cleaner! Many parts of the Babboe cargo bike require oil, grease or vaseline.
Do not wash these substances away or apply them again immediately after washing.
Treatment
Besides regular cleaning, it is recommended to treat certain parts of the cargo bike immediately after cleaning.
We recommend that you grease around chromed parts, uncoated aluminium and stainless steel parts with
acid-free vaseline to prevent oxidation and rust. Rotating parts require grease or oil. It is advisable to periodically
lubricate the chain, sprockets and shafts. To prevent corrosion, we recommend that you regularly mend any
damage to the paintwork.
32
General check
Regularly check the following:
• Is the battery fully charged?
• Are the brakes working properly? Are the brakes, bolts and screws still tightened? Is there any visible wear
and tear on the cables? Are the braking surfaces clean and grease-free? Is there any visible wear and tear on
the brake pads?
• Is the handlebar stem still tightened? Is the saddle tightened properly?
• Are the handgrips secure?
• Is the tension on the spokes adequate? Are the wheels straight? Are there any spokes broken? Are the
wheels secure?
• Are the tires still at the right tension? Is there still enough profile grip on the tires?
• Do the lights work? Is the bike clearly visible in the dark? Are there reflective strips on the tires and are they clean?
• Does the pedal assistance work properly?
• Do the gears work properly?
• Is the chain tension correct?
• Does the bicycle need a proper cleaning?
• Has the bicycle had a maintenance check-up recently?
IMPORTANT! PLEASE NOTE:
• Do not clean your Babboe cargo bike with a strong water jet or high-pressure hose, as this can damage the
electronics of the cargo bike. This will affect your warranty.
• By improper use, you can put yourself and others at risk. More importantly your warranty will expire.
33

Publicité

Table des Matières
loading

Table des Matières