Accessories; Technical Specification - Bibby Scientific Stuart SHM1 Manuel D'utilisation

For any other technical enquiries, please contact
the Technical Support Department:
E-mail: stuarthelp@bibby-scientific.com
Tel: +44 (0)1785 810433.

Accessories

Description
Retort stand assembly
Probe adaptor
(for use with disposable
plastic probes)
Generator probe
5mm x 75mm (flat bottom)
Generator probe
7mm x 115mm (saw tooth)
Generator probe
10mm x 115mm (saw tooth)
Generator probe
20mm x 195mm (saw tooth)
Generator probe,
plastic disposable
7mm x 110mm (hard tissue)
Other generator probes may be available upon
request. Please contact
equipment@bibby-scientific.com
6
Warranty
Stuart warrants the SHM1 and SHM2 to be free
from defects in material and workmanship, when
used under normal laboratory conditions, for a
period of three (3) years. The stainless steel
rotor-stator generator probes are covered by a
warranty period of one (1) year. In the event of a
Catalogue Number
justified claim, Stuart will replace any defective
SHM/STAND
component or replace the unit free of charge.
This warranty does NOT apply if damage is
caused by fire, accident, misuse, neglect,
incorrect adjustment or repair, damage caused by
SHM/ADAPT
installation, adaptation, modification, fitting of
non-approved parts or repair by unauthorized
SHM/5
personnel.
Bibby Scientific Ltd.
SHM/7
Beacon Road,
Stone, Staffordshire
SHM/10
ST15 0SA
United Kingdom
Tel: +44 (0)1785 812121
SHM/20
Fax: +44 (0)1785 813748
E-mail: equipment@bibby-scientific.com
www.stuart-equipment.com
SHM/DISP

Technical Specification

Motor
speed
Capacity
Height
(motor only)
Weight
(motor only)
Power
Motor Power
SHM1
5000-35000 5000-30000
rpm
0.03ml-100ml 0.03ml-2 litres
229mm
0.47kg
220-240V, 50Hz
125W
SHM2
rpm
220mm
1.6kg
700W