Safety Side Height Extensions - arjo Minuet 2 Notice D'utilisation

Safety side height extensions

These instructions illustrate the fitting of safety side height extensions
CM-ACC02-1.52 and CM-ACC02-3.52 for full length standard height
wooden safety sides (CM-ACC00-1.52, CM-ACC00-3.52, and CM-
ACC01-1.52).
Safety side height extensions should be used with the recommended
thickness of mattress (see page 12). Clamp-on extensions can be
added to the full-length safety sides to increase their height by 140mm
and allow use of a mattress overlay of a thickness from 110 to 115mm.
CM-ACC02-1.52 and CM-ACC02-3.52 are for use with full length standard
height wooden safety sides CM-ACC00-1.52, CM-ACC00-3.52 or CM-ACC01-
1.52.
The safety side height extensions are supplied as identical pairs. They can be
used on either side of the bed.
Only use safety side height extensions with the safety sides for
which they are designed.
Always use the correct M8 size hex wrench (Allen key) supplied
when fitting the socket head screws. Using other tools may
result in the screws not being fully tightened.
Before use, make sure that the accessory is tightly fitted to the
safety side and does not move forward.
WARNING
CM-ACC02.52
28