Key To Symbols; Symbols On The Machine; Symbols On The Battery And/Or On The Battery Charger - Husqvarna 120i Manuel D'utilisation

Symbols on the machine:

Translation of the original Swedish operating instruction.
WARNING! Chain saws can be
dangerous! Careless or improper use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
• Approved protective helmet
• Approved hearing protection
• Protective goggles or a visor
Both of the operator ' s hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Never let the guide bar tip come in
contact with any object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Recommended cutting
equipment in this example: - Bar
length 14 inches (350mm) - Max.
nose radius 7 Teeth.
Chain brake, activated (right)
Chain brake, not activated
(left)
Chain oil fill.
Environmental marking. Symbols on the
product or its packaging indicate that this
product cannot be handled as domestic
waste. It must instead be submitted to an
appropriate recycling station for the

KEY TO SYMBOLS

recovery of electrical and electronic equipment.
Direct current.
Do not expose to rain.
Rated voltage, V
The rating plate
showing serial number.
yyyy is the production
year, ww is the
productionweek.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols on the battery and/or on
the battery charger:
This product must be
deposited at an
appropriate recycling
facility. (Applies in
Europe only)
Fail-safe transformer
Use and store battery charger only
indoors.
Double insulation
14'' / 350 mm
California Prop 65 Warning
For customer assistance call: 1-800-487-5951 or visit
www.usa.husqvarna.com.
yyyywwxxxxx
English
–
7