Key To Symbols; Symbols On The Machine; Symbols On The Battery And/Or On The Battery Charger - Husqvarna T536 LiXP Manuel D'utilisation

Masquer les pouces Voir aussi pour T536 LiXP:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Symbols on the machine:

Translation of the original Swedish operating instruction.
WARNING! Chain saws can be
dangerous! Careless or improper use can
result in serious or fatal injury to the
operator or others.
Please read the operator's manual
carefully and make sure you understand
the instructions before using the machine.
Always wear:
Approved protective helmet
Approved hearing protection
Protective goggles or a visor
Both of the operator's hands must be
used to operate the chain saw.
Never operate a chain saw holding it with
one hand only.
Never let the guide bar tip come in
contact with any object.
WARNING! Kickback may occur when
the nose or tip of the guide bar touches an
object, and cause a lightning fast reverse
reaction, kicking the guide bar up and
towards the operator. May cause serious
personal injury.
Recommended cutting
equipment in this example:
- Bar length 14 inches (356mm)
- Max. nose radius 9 Teeth
- Chain type Husqvarna H38
Measured maximum kickback value
without triggering the brake, for the bar and
chain combination on the label.
Measured maximum kickback value
without chain brake for the bar and chain
combination on the label.
Chain brake, activated (right) Chain
brake, not activated (left)
Chain oil fill.
Direct current
2 – English

KEY TO SYMBOLS

Do not expose to rain.
Other symbols/decals on the machine refer to special
certification requirements for certain markets.
Symbols on the battery and/or on
the battery charger:
This product must be
deposited at an
appropriate recycling
facility.
Fail-safe transformer
Use and store battery charger only
indoors.
Double insulation
XX
XX

Publicité

Table des Matières
loading

Table des Matières