Features; Assembly - Ryobi P755 Manuel D'utilisation

Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
V Volts
min Minutes
Direct Current
No Load Speed
n o
.../min Per Minute
PRODUCT SPECIFICATIONS
Air Velocity .................................................................................................................................................................160 MPH
Air Volume ................................................................................................................................................................... 93 CFM
UNPACKING
This product requires assembly.
 Carefully remove the tool and any accessories from the
box. All items listed in the Includes section must be
included at the time of purchase.
WARNING:
Items in this Assembly section are not assembled to
the product by the manufacturer and require customer
installation. Use of a product that may have been
improperly assembled could result in serious personal
injury.
 Inspect the product carefully to make sure no breakage
or damage occurred during shipping.
 Do not discard the packing material until you have care-
fully inspected and satisfactorily operated the product.
 If any parts are damaged or missing, please call
1-800-525-2579 for assistance. In Mexico, please call
01-800-843-1111.
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
SYMBOLS
NAME
Voltage
Time
Type or a characteristic of current
Rotational speed, at no load
Revolutions, strokes, surface speed, orbits etc., per minute

FEATURES

ASSEMBLY

5 — English
DESIGNATION/EXPLANATION
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this blower.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
tool when assembling parts.
INSTALLING THE BLOWER NOZZLE
See Figure 1, page 8.
 Align the tabs inside the nozzle with the slots on the
blower outlet.
 Push the nozzle onto the blower outlet until it stops.
 Turn the nozzle clockwise until it is securely attached.
 To remove the nozzle, turn it counterclockwise until it
stops and slide the nozzle off.