GE Monogram ZET1P Manuel Du Propriétaire page 35

The door is very heavy. Be careful when removing
Lift-off
and lifting the door.
oven
Do not lift the door by the handle.
door—
removal
To remove the door:
1 Fully open the door.
2 Pull the hinge locks down toward the door
3 Firmly grasp both sides of the door at the top.
4 Close door to the door removal position,
To replace the door:
1 Firmly grasp both sides of the door at the top.
2 With the door at the same angle as the
3 Fully open the door. If the door will not fully
4 Push the hinge locks up against the front
5 Close the oven door.
Probe
The temperature probe may be cleaned with
soap and water or a soap-filled scouring pad.
Cool the temperature probe before cleaning.
Scour stubborn spots with a soap-filled scouring
pad, rinse and dry.
Do not immerse the temperature probe in water.
Do not store the temperature probe in the oven.
frame, to the unlocked position. A tool, such
as a small flat-blade screwdriver, may be
required.
which is most of the way and lift it up and out
until the hinge arm is clear of the slot.
removal position, seat the indentation of the
hinge arm into the bottom edge of the hinge
slot. The notch in the hinge arm must be
fully seated into the bottom of the slot.
open, the indentation is not seated correctly in
the bottom edge of the slot.
frame of the oven cavity, to the locked
position.
Care and Cleaning
Wall Oven
Slot
Hinge lock
Pull hinge locks down to unlock
Removal position
Bottom
edge of
slot
Hinge
arm
Hinge
lock
Push hinge locks up to lock
Hinge arm
Indentation
35